Renesis 13B-MSP Engine Technical Data Master Tables

Engine Measurements, Tolerances and Clearances

Items	Measurements / Tolerances
Side Housing (Front, Intermediate, Rear) Inspection		in	mm
Maximum Distortion		0.0016	0.04
Maximum wear (Vertical wear)		0.0039	0.10
Maximum wear (Convex oval)	Oil seal inner path	0.0004	0.01
	Oil seal outer path	0.0039	0.10
Maximum wear (Oil seal stepped path wear)		0.0008	0.02
Rotor Housing		in	mm
Maximum width difference		0.0024	0.06
Rotor		in	mm
Rotor and side housing clearance	Standard	0.0020—0.0074	0.05—0.19
	Maximum	0.002	0.05
Protrusion of the rotor round	Standard	0.0048—0.0070	0.12—0.18
	Minimum	0.0039	0.1
Apex seal groove and the apex seal clearance	Standard	0.0017—0.0030	0.042—0.077
	Maximum	0.0059	0.15
Apex Seal, Apex Seal Spring		in	mm
Apex seal height	Standard	0.20	5.3
	Minimum	0.17	4.3
Apex seal spring height	Standard	0.213	5.4
	Minimum	0.148	3.5
Corner Seal, Corner Seal Spring		in	mm
Minimum projection of the corner seal		0.02	0.5
Side Seal, Side Seal Spring		in	mm
Corner seal and side seal clearance	Maximum	0.016	0.4
Minimum projection of the side seal		0.02	0.5
Cut-off Seal, Cut-off Seal Spring		in	mm
Cut-off seal height	Standard	0.1555	3.95
	Minimum	0.15	3.8
Minimum projection of the cut off seal		0.02	0.5
Oil Seal, Oil Seal Spring		in	mm
Maximum contact width		0.02	0.5
Maximum circumferential width		0.098	2.5
Minimum projection of the oil seal		0.02	0.5
Eccentric Shaft		in	mm
Main bearing oil clearance (4 Port)	Standard	0.0022—0.0029	0.045—0.085
	Maximum	0.0039	0.1
Main bearing oil clearance (6 Port)	Standard	0.0018—0.0033	0.055—0.075
	Maximum	0.0039	0.1
Rotor bearing oil clearance	Standard	0.0024—0.0030	0.06—0.08
	Maximum	0.0039	0.1
Runout	Standard	0.0008	0.02
	Maximum	0.0024	0.06
End play	Standard	0.0016—0.0035	0.04—0.09
Eccentric Shaft Bypass Valve		in	mm
Minimum projection		0.24	6
Oil Pump		in	mm
Body clearance	Standard	0.0079—0.0098	0.20—0.25
	Maximum	0.0118	0.3
Tip clearance	Standard	0.0012—0.0047	0.03—0.12
	Maximum	0.0059	0.15
Side clearance	Standard	0.0012—0.0049	0.03—0.125
	Maximum	0.0059	0.15

Engine Torque Specs

Specification	ft/lb
Counterweight / Flywheel Nut	290-360
Flex Plate to Counterweight (Automatic)	32-44
Front Eccentric Shaft Hub Bolt	180-200
Front Cover Bolts	12-16
Intake to Engine Bolts	12-16
Lower to Upper Intake Bolts	12-16
Exhaust Manifold to Engine Bolts	51-57
Oil Meeting Pump Bolts	5.8-8
Front oil Pressure Regulator Cap	29-36
Oil Strainer Bolts	5.1-7.2
Oil Pan Bolts	6.6-8.6
Oil Pump Bolts	5-7
Oil Pump Sprocket Nut	24-33
Rear Oil Pressure Regulator	51-57
Oil Filter Adapter Nuts	5.8-8
Oil Pressure Sensor	8-11
Stationary Gear Bolts	12-16
Tension Bolts	24-28
Clutch Cover / Pressure Plate Bolts	14-19
Water Pump to Water Pump Housing Bolts	14-19
Water Pump Housing to Block Nuts	14-19
Oil Metering Nozzle	12-15
Knock Sensor	15-25